For details on
individual products, specialty cables, included
accessories and warranties or to place an order, give us a
call toll free at: 866-595-3368
We have an
extensive inventory too large to list here!
Need
switchers, DA's or scan converters, give us a call for all
your distribution needs.
WP
Series - Wall Plate Adapters / Processors
This
series includes passive and active wall plate devices
for interfacing audio, video, s-Video and XGA (and
graphics sources of other resolutions) to standards as
needed in Presentation and other applications.
Passive
Devices
FRAME
WA-1
- Terminal Blocks Adapter for Balanced
Stereo Audio
A
6-pole terminal block on both sides of the
adapter for connecting balanced stereo
audio.
WV-2
- Dual
BNC to Terminal Block Adapter
A
dual BNC to 6-pole terminal block adapter
for connecting two video sources.
WB
45 - BNC and RJ-45 Pass Through
WRR
- Double RCA Pass Through
WA-2
- Dual RCA to terminal block
adapter
A
dual RCA to a 6-pole terminal block adapter
for connecting a stereo audio signal (single
stereo channel.)
WA-3
- Dual Mini Headphone Connector to
terminal block adapter
A
dual 3.5 mm mini headphone connector to a
6-pole terminal block adapter for connecting
dual audio stereo channels.
WAV-1
- BNC+Mini Headphone Connector to Terminal
Block Adapter
A
BNC and a 3.5 mm mini headphone connector to
a 6-pole terminal block, for connecting
video and stereo audio.
WBB
- Double BNC Pass Through
WR
45 - RCA and RJ-45 Pass Through
WAS-1
- 4P+Mini Headphone Connectors to
Terminal Block Adapter
An
s-Video (on a “4P”connector)
and a 3.5 mm mini headphone connector to a
6-pole terminal block, for connecting
s-Video and stereo audio.
WX-1
- HD-15 to Terminal Block Adapter (VGA
through UXGA)
A
HD-15 (VGA through UXGA) connector to a 6+2
terminal block connector for connecting a
graphics source. The adapter includes a
switch for ID bit control.
A
dual RCA connector output to a 6-pole
terminal block for converting balanced
stereo audio to unbalanced stereo audio (or
to act as a twisted-pair stereo audio
receiver).
A
3.5 mm mini headphone connector to a 6-pole
terminal block for converting an unbalanced
stereo audio signal to balanced audio (or
act as a twisted-pair audio transmitter)
with Right and Left audio level controls.
A
3.5 mm mini headphone connector output to a
6-pole terminal block for converting
balanced stereo audio to unbalanced stereo
audio (or to act as a twisted-pair stereo
audio receiver).
A
dual RCA connector to a 6-pole terminal
block for converting an unbalanced stereo
audio signal to balanced audio (or to act as
a twisted-pair audio transmitter) with Right
and Left audio level controls.
WV-11
- Twisted-Pair
Transmitter
Video
on a BNC connector to a 3-pole terminal
block twisted-pair transmitter with video
LEVEL and EQ. controls, allowing high
quality video to be sent a distance of up to
1 km.
WV-12
- Balanced to Unbalanced Video Converter for
Twisted Pair
Provides
a video output (on a BNC connector) from a
3-pole terminal block to convert twisted
pair balanced video to unbalanced video. It
provides LEVEL and EQ. controls and works in
conjunction with the WV-11.
WV-20
- A 1:2 distribution amplifier and line
driver for video
WP-210
- XGA Line Driver
A
1:2 distribution amplifier and line driver
for video on a BNC to a 3-pole terminal
block connector. Video bandwidth exceeds 400
MHz and quality video can be obtained (when
using high quality coax cables) even 300
meters (1000 ft.) away. The device also
provides video LEVEL and EQ. controls.
The
Kramer WP-210 is the latest addition
to our successful line of Wall Plate
Adaptors. The unit accepts a VGA input (up
to UXGA resolution) on a standard HD-15
connector, and provides the RGBHV outputs on
5 BNC connectors. The WP-210 uses
high-quality line-drivers to transmit the
video over the typical long distances
inherent in these systems, with the user
having control over the gain and cable
equalization. Switches are provided to set
the status of the ID-bit, and to select
between analog / digital sync operation.
