|
 Single
Station Control $53
Standard with most Draper electrically operated
screens. 3-position rocker switch accepts 115v
current. Switch operation is sustained contact.
Complete with single-gang cover plate. UL
listed. See below for Access Sonata and Access
MultiView switch information. Also available in 220v
current.
115
Volt Multiple Station Controls
$108
Identical in appearance to Single Station Control,
above. Automatic override allows only one signal
to reach the motor when switches are operated
simultaneously. Also available in 220v current.
 *Low
Voltage Control Module and Switch
$243
The most versatile control for your electric
screens. Order the LVC III low voltage control
unit without switches (as an interface for a
sophisticated master control system), or with one or
more 3-button low voltage switches.
Switches have neutral decorator face plates for flush
wall mounting. The control unit is also equipped
with jacks for easy connection to Draper RF and IR
receivers. Wiring from control unit to switches
or receivers is lightweight for 24-volt current.
Optional for all Draper motorized screens, except
Access Sonata.
 *Radio
Frequency Remote Control $242
Hand-held transmitter. 3-button control lets you
change direction or adjust format at any point.
Receiver plugs into the Draper low-voltage control
unit. Receiver plugs into the Draper low-voltage
control unit, and must be ordered with it.
 *Infrared
Remote Control $98
Infrared transmitter and receiver. 3-button
operation for instant access to "up",
"down", and "stop"
functions. Fully compatible with
"learnable" IR master control systems.
Receiver plugs into the Draper low-voltage control
unit, and must be ordered with it.
 Key
Operated Power Supply Switch $78
Useful with any control system for a Draper
electrically operated projection screen--low voltage
or 115v. Switch mounts next to operating switch
and controls power to it.
 Locking
Switch Cover Plate $108
115v 3-position control switch for limited
access. Cover plate and locking switch cover are
brushed stainless steel. Two keys
furnished.
 Key
Operated 3-Position Switch $93
Similar to Draper’s standard 3-position control
switch, but requires a key for operation. 115v
control only. Two keys furnished.
  *Video
Interface Control $130
Allows screen to be controlled by projector
switch--when the projector comes on, the screen
descends automatically. Model VIC115 integrates
screen operation with a Draper video projector lift,
or a video projector or tuner with a 115v switched
outlet. Models VIC12 & VIC6 interface screen
operation with a video projector or tuner featuring a
12v switched outlet. The VIC115, VIC12 &
VIC6 may be purchased with an override switch (VIC–OS),
permitting independent operation. A VIC is not
compatible with an LVC-III, built-in or
otherwise.
 Controls
for Access Sonata Call
The standard control switch for the Access Sonata is a
programmable low voltage 6-button wall switch that
Draper presets with four format settings. Change
to any format at the touch of one button! The
Access Sonata standard control switch is compatible
with the Sonata Infrared Remote Control Kit (ASON-IRT),
and Sonata Projector Interface 12v and 6v (ASONPI-12
and ASONPI-6).
 Controls
for Access MultiView Call
Both screen and masking system are independently
controlled, each using any standard or optional
control offered above. Two, SS-1R’s are
standard supplied. Or, select AMV-C, a low
voltage control that allows both motors to be
controlled by independent 3-button switches in a
single box.
*These optional controls may be factory-installed into
the case of Access, Access MultiView & Ultimate
Access/Series E and V, or Silhouette/Series E or V
with no installation charge. Built-in controls
may increase length of case: call for exact
dimension. Choose either an LVC-III with or
without a wireless transmitter, or choose a VIC.
LVC-III and VIC are not compatible on a single motor,
built-in or otherwise. Both may be used in an
Access MultiView, which has two independently
controlled motors.
|
